Table of Contents
Advertisement
96
en | Operation
6.2.5
View Control
Control options for peripherals (for example a pan/tilt camera head or dome camera) depend
on the type of unit installed and on the VideoJet X20 SN's configuration.
If a controllable unit is configured and connected to the VideoJet X20 SN, the controls for the
peripheral are displayed next to the video image.
1.
2.
6.2.6
Digital I/O
The alarm icons Input 1 to Input 4 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The unit's
configuration determines whether the alarm is displayed, as well as additional details (see
Section 5.32 Livepage Configuration, page 85).
6.2.7
Trigger Relay
You can switch connected units using the relays in the VideoJet X20 SN (for example lights or
door openers).
V3.5 | 2007.12
To control a peripheral, click the appropriate controls.
Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.
Installation and Operating Manual
VideoJet X20 SN
Bosch Security Systems
Advertisement
Table of Contents
