Table of Contents
Advertisement
54
en | Configuration Using a Web Browser
5.18.4
Editing a Partition
You can modify the configuration of a partition at any time.
CAUTION!
All modifications result in the reorganization of the partition and all sequences stored on it are
!
therefore lost.
Consequently, you should back up all important sequences on the computer's hard drive
before modifying the partition.
You can perform the required modifications in the Partition Properties window.
1.
2.
3.
4.
5.
5.18.5
Partition name
You can enter a new name for the partition.
5.18.6
Partition number
The partition number (= number of the video input) is displayed for information purposes.
5.18.7
Type of recording
Select the required recording type.
In the case of Ring mode the recording proceeds continuously. If the maximum hard drive
space has been reached, the oldest recordings are automatically overwritten.
In the case of Linear mode the recording proceeds until the entire hard drive space is full. The
recording is then stopped until old recordings have been deleted.
V3.5 | 2007.12
In the list, click the partition that you want to modify in order to select this partition.
Click the Edit partition button. A new window with the entries for the selected partition
is opened.
Make the desired changes.
Click the << and >> buttons to edit other partitions.
Click the Set button to save the modifications.
Installation and Operating Manual
VideoJet X20 SN
Bosch Security Systems
Advertisement
Table of Contents
