Indicator - Meyra 1.595-603 Operating Manual

Indicator

Spherical bulb:
24V/21W BAY9s
☞
Note:
Use a dry cloth to hold the glass
body of the new fi lament bulb.
☞
Also a clean paper slip, slid around
the bulb in a sling, can be used to
exchange the bulb.
Removal
– Switch off the operating module.
– Pull out the main fuse.
– Insert a small slot screw driver into
one of the two lateral slots (2) and
the wedge off the dispersion disc
(1) carefully.
– Press defective ball lamps lightly,
if necessary slung with a strip of
paper, turn it and pull it from the
socket.
Mounting
– Replace a new ball lamp, if neces-
sary slung in a paper strip. – Push
the side pins (bayonet catch) into
the recesses of the bulb holder,
press lightly against the spring and
then turn the bulb until the bayo-
net catch clicks into place.
– Mount the dispersion disc. – Insert
the spring fi rst with the thin end
(3), then carefully press the disper-
sion disc on (4).
☞
The locking device of the second
spring must audibly engage.
1
3
4
2
47