Table of Contents
Advertisement
To set the time of day
A
Press the Plus and Minus buttons
u
together for a few seconds and
release.
Set the time of day using the Plus and
u
Minus buttons. Press once for single
digit increase, press and hold for
rapid increase..
Once the time of day has been set
u
wait approx 10 seconds until the ' l '
stops flashing.
Use the appliance as normal.
u
To select an alarm tone
There are three tones to chose from.
Press the minus button to listen to the
u
first tone.
Release the minus button and press it
u
again to listen to the second tone etc.
Releasing the minus button after the
u
tone has sounded will automatically
select that tone
PROGRAMMER / CLOCK
Setting the minute minder
To set the Minute Minder, press the
u
Function button once. The bell symbol
will appear and start flashing. The
flashing only lasts for 5 seconds so the
time must be set within this time frame.
Use the Plus and Minus button to set
u
the length of time required. Once this
has been done, the Minute Minder is
set.
When the desired length of time has
u
counted down the alarm will sound.
To cancel the tone, press any of the
u
buttons.
To cancel the Minute Minder at any
u
time, press the function button, then
press the Plus and Minus buttons
together.
21
Advertisement
Table of Contents
