Table of Contents
Advertisement
messages deleted'.
b. Press
to cancel message deletion. This will also save
any messages you have selected individually for deletion.
Any messages not deleted will be saved.
You will hear a beep to confirm when 8 seconds has elapsed.
Outgoing messages (OGMs)
The outgoing message is the message a caller first hears
when the answering machine picks up their call.
Your BT Freelance XD 1500/1550 has two pre-recorded
outgoing messages, Answer & Record or Answer Only,
and you can also record your own.
Record your own OGM
This will replace the pre-recorded or your own previous
outgoing message. However, you can re-instate the
pre-recorded OGM at any time by deleting your own
recorded OGM.
At the base:
1. Press and hold
of OGM you want to record.
2. Press and keep holding
If you experience any problems, please call the Helpline on 0870 605 8047
BT Freelance XD 1500/1550 – Issue 2 - Edition 2 – 21.09.05 – 7060
until prompted to select which type
to select Answer & Record
Using the answering machine
Answer and Record
The pre-set Answer and Record
outgoing message, that allows
your caller to leave a message, is
"Hello, your call cannot be taken at
the moment, so please leave your
message after the
tone".
Answer Only
With Answer Only selected, your
caller will hear an announcement
only and will not be able to leave
a message. The pre-set Answer
Only outgoing message is "Hello,
your call cannot be taken at the
moment and you cannot leave a
message, so please call later".
If recording your own Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
To reinstate either pre-recorded
message, delete your own message.
31
Hide quick links:
Advertisement
Table of Contents
