NVIDIA Shield
Follow the steps below to achieve ultra low delay on NVIDIA Shield:
1.
Go to "Settings", and then select Miracast.
2.
Tap on the toggle switch to turn "Game Mode" on.
Note: The output resolution will reset to 720P once this mode is enabled. Refer to the
device's user manual for more information.
Restore to Default
To restore the Receiver's default factory settings:
1.
Power on the Receiver, and wait until the "Ready to Connect" screen appears.
2.
Hold down the Receiver's "Reset" button.
3.
When the "Reset to Default" screen appears on the HDTV, release the "Reset" button.
The Receiver reboots, and it will be running with its default settings.
16