Turntable Operation
Turn the unit on by pressing the POWER BUTTON
located on the front panel to the ON position.
1
Slide the FUNCTION SWITCH (4) to select
PHONO mode.
2
Set the SPEED CONTROL SWITCH (27) to
the desired speed (33-1/3, 45 or 78rpm). Place
the record on the turntable.
3
Use the CUE LEVER (25) to raise the tone arm
off its rest.Pull the TONE ARM (26) gently to
the right side until you hear a click. The turntable
will start turning.
4
Move the TONE ARM (26) by hand to the record
and slowly lower it to the desired starting point.
Turn the VOLUME KNOB (3) to adjust the
volume to the desired level.
5
At the end of the record, the TONE ARM (26)
will stop automatically. You must return the
TONE ARM (26) to TONE ARM REST (28) by
hand.
Turntable Operation
Accessory: ADAPTER FOR 45 RPM
To play the 45rpm record, place the ADAPTER (24)
on the spindle.
7