Connecting Optional Equipment; Auxiliary Input; Troubleshooting Guide - Crosley CR704 Instruction Manual

Connecting Optional Equipment

Auxiliary Input

1
You can connect external components to your
unit by using the Auxiliary Input.
2
Plug Auxiliary cable into the LINE IN JACK (32)
on the back of your unit.
3
Switch the LINE IN SWITCH (31) to the ON
position.
4
Plug the other end of the Auxililary cable into
the output jack on your desired external
component.
5
Check the volume level of your external
component.
6
See operators manual for correct operation of
the external component.
NOTE: When not using the Auxiliary Input, make
sure the LINE IN SWITCH (31) is in the
OFF position.
Troubleshooting
There is no Power
1
Make sure the radio is plugged in correctly.
2
Check to see that the power button is
pushed in.
There is no Sound
1
Check the volume level by turning the volume
knob.
2
Make sure the Line In Switch is in the off position
if not using the Auxiliary Input.
Turntable will not work
1
Make sure the function switch is set to phono.
2
Try moving the tone arm to the right until you
hear a click.
3
Make sure the protective needle cover is
removed.
CD does not play
1
Check to make sure CD is inserted correctly
(label side facing up).
2
Check that the surface of the CD is clean
3
Make sure function switch is set to CD.
11