Installing A Dimm On A Single Clip Dimm Socket - Asus P9D-M Series User Manual

2.4.3

Installing a DIMM on a single clip DIMM socket

1. Unlock a DIMM socket by pressing
the retaining clip outward.
2. Align a DIMM on the socket
such that the notch on the DIMM
matches the DIMM slot key on the
socket.
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3. Hold the DIMM on both ends then
insert the DIMM vertically into the
socket. Apply force to both ends of
the DIMM simultaneously until the
retaining clip snaps back into place
and the DIMM cannot be pushed
in any further to ensure proper
seating of the DIMM.
Always insert the DIMM into the socket vertically to prevent DIMM notch damage.
• To install two or more DIMMs, refer to the user guide bundled in the motherboard
package.
• Refer to the user guide for the Qualified Vendor List (QVL) of the memory modules.
Removing a DIMM from a single clip DIMM socket
1. Press the retaining clip outward to
unlock the DIMM.
2. Remove the DIMM from the socket.
Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM
might get damaged when it pops out with extra force.
ASUS P9D-M Series
DIMM notch
2
DIMM slot key
2
1
Unlocked retaining clip
3
Locked Retaining Clip
1
2-17