Mechanical Control - Yamaha V MAX SHO Hot Sheet

V MAX SHO
CONVENIENCE AND CONTROL
F250 SPECIFICATIONS

MECHANICAL CONTROL

Yamaha V MAX SHO outboards are cable-actuated,
allowing use of our 6X3 fl ush side-mount remote control.
You can even add your own foot-operated throttle for
additional convenience.
Consult appropriate Yamaha rigging information and Yamaha Rigging Sheet (YMBS) for
complete rigging compatibility and requirements information for particular confi gurations.
All rigging items sold separately.
CLEAN AND EFFICIENT
Yamaha V MAX SHO outboards feature a Blow-by Gas
Re-Burning System. This separates any unburned combustion
gases and re-routes them to the air intake system where
they are burned again, helping maximize fuel effi ciency
and earn a CARB 3-star emissions rating.
Revised 12/18/09
Super High Output Four Stroke
VARIABLE TROLLING RPM
By just pressing a button on the optional Command Link®
tachometer, the operator can adjust the engine's trolling
speed from 600 ~ 1000 rpm, in 50-rpm increments. This
helps provide precise and consistent trolling speeds in a wide
array of conditions.
SMOOTH AND QUIET
Engine exhaust is routed through a maze before exiting
above the waterline through the idle exhaust relief outlet, for
unbelievably smooth and quiet operation. A muffl erless
design creates a more direct exhaust fl ow and a pleasing
sound of power at idle.