Assembly; Operating Instructions; Unfold - Britax Blink User Manual

Assembly

Initial Assembly
1 Locate both dual front wheels
and canopy
4 Press two attachment clips onto each side of stroller frame, placing
clips above and below where fabric overlaps frame
5 Attach hook and loop fasteners around seat back
4
2 Attach front wheels to stroller
frame
3 Unfold stroller as instructed on
page 5

Unfold

1 Squeeze frame while
releasing chassis lock
3 Step on frame lock pedal to
lock stroller chassis
IMPORTANT - Make sure frame is
locked before use

Operating Instructions

2 Lift handle upward and apart to
unfold stroller
4 Adjust leg rest into desired
position by pressing release
levers as shown
5