Toyostove Laser 73 Installation And Operation Instructions Manual page 13

Laser clean heating system/vented heater
Hide thumbs Also See for Laser 73:
Table of Contents

Advertisement

1.
Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2.
Clean Circulation Fan Cover (ONCE A WEEK)
Remove only dust or pet hair from the cover on the back of the heater.
3.
Check for Kerosene Leaks (REGULARLY)
Make it a habit to check for any sign of kerosene leakage along the fuel line
and at all joints. Kerosene leaks may lead to risk of fire.
4.
Check Flue Pipe Area (ONCE A WEEK)
Check the flue pipe joint to make sure connection is firm. Use a vacuum
cleaner to remove any dust or pet hair.
5.
Clean Fuel Strainer (ONCE A MONTH)
The strainer of the fuel sump should be cleaned once a month and before
storing heater at the end of each season.
(a) Close the valve(s) of the separate fuel tank.
(b) To catch the fuel which will drain out, set the oil catch below the strainer
cover, with a small container under it.
(c)
Loosen the two screws from the strainer cover and remove.
(d) Remove the strainer and wash with kerosene.
(e) Return the strainer to its original position. Replace strainer cover and
screw to secure.
(f)
Wipe away any spilled kerosene.
(g) Open the valve(s) of separate fuel tank. Check for kerosene leakage.
Note:
At the end of each season unscrew the drain screw to remove all the
remaining kerosene from the fuel sump.
Be sure to follow the A and B procedure listed above.
Check
Oil catch
Fuel
Strainer
Drain
Screw
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Laser 73at type mLaser 73 type mLaser 56

Table of Contents