Making Calls Using The Headset; Transfers A Call From The Mobile Phone To The; Rejects An Incoming Call; Transfers A Call From The Headset To The Mobile - Sennheiser EZX70 Instruction Manual

Using the EZX 70

Making calls using the headset

Making a call
Dial the desired number on your mobile phone.
You hear a beep in the headset.
If your mobile phone does not automatically transfer the call to the
headset, simply press the multi-function button once to transfer the
call from the mobile phone to the headset. Alternatively, press a button
on your mobile phone (see the instruction manual of your mobile
phone).
Accepting/rejecting/ending a call
When your EZX 70 is connected to a mobile phone and you receive a call,
you hear a ring tone in the headset and the LED flashes blue every
2 seconds. If the headset battery is low, the LED flashes red instead of blue.
If you listen to music, the music is stopped until you end the call.
When you receive a call and your headset is switched off, simply switch
your headset on to accept the call.
Press the multi-function button:
Duration Function
Accepts a call
Rejects a call
2s
Ends a call
Transfering the call to/from the headset
Once a connection is established, you can transfer the call to/from the
headset.
Press the multi-function button:
Duration Function
Transfers a call from the headset to
the mobile phone
2s
Transfers a call from the mobile
phone to the headset
Beep(s)
Beep(s)
EZX 70 | 17