Switching The Headset On/Off; Switches The Headset On; Switches The Headset Off - Sennheiser EZX70 Instruction Manual

Using the EZX 70
14 | EZX 70

Switching the headset on/off

Switching the headset on
Move the on/off switch to the position ON.
The LED flashes 3 times blue and you hear an ascending sequence of
beeps. When the headset is paired but not yet connected to the mobile
phone, the LED flashes 3 times blue every 5 seconds. Once the headset
and the mobile phone are connected, the LED turns off and the voice
prompt "connected" is announced in the headset.
If the headset is switched off and then on again within 10 seconds,
there might be no voice prompt because the reset procedure is not
completed.
Switching the headset off
If the headset has not been used for more than 1 hour, it automatically
switches off to conserve battery power.
Move the on/off switch to the position OFF.
The LED flashes 3 times red. You hear a descending sequence of beeps.
Connection profiles and volume settings are saved automatically
when the headset is switched off.
"connected"