Maintenance Information; Ozone Safety Information - Xerox 6050 User Manual

• Never remove covers or guards that are fastened with screws. There are no operator
serviceable areas within these covers.
• Never locate the equipment near a radiator or any other heat source.
• Never push objects of any kind into the ventilation openings.
• Never override or "cheat" any of the electrical or mechanical interlock devices.
• Never operate the equipment if you notice unusual noises or odors. Disconnect the power
cord from the electrical outlet and contact your local Xerox/Fuji Xerox Service Representative
or Service Provider immediately.

Maintenance Information

Do not attempt any maintenance procedure that is not specifically described in the
documentation that is supplied with your copier/printer.
• Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor
performance of the equipment, and could create a dangerous condition.
• Use supplies and cleaning materials only as directed in this manual. Keep all of these
materials out of the reach of children.
• Do not remove covers or guards that are fastened with screws. There are no parts behind
these covers that you can maintain or service.
• Do not perform any maintenance procedures unless you have been trained to do them by an
authorized local dealer or unless a procedure is specifically described in the user manuals.

Ozone Safety Information

This product will produce ozone during normal operation. The ozone produced is
heavier than air and is dependent on copy volume. Providing the correct environ-
mental parameters as specified in the Xerox installation procedure will ensure that
the concentration levels meet safe limits.
If you need additional information about ozone, please request the Xerox publica-
tion Ozone by calling 1-800-828-6571 in the United States and Canada. In other
markets please contact your authorized local dealer or Service Provider.