Troubleshooting - MULTIQUIP GloBug GB3LED Operation And Parts Manual

Symptom
Lamp does not light.
Balloon is not infl ating.
GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 25

Troubleshooting

Possible Problem
Is plug connected?
Is generator's main switch turned off? Turn on switch.
Are any wire cables disconnected?
Are any other electric appliances
(other than light tower) plugged into
power source?
Is generator voltage not normal
(standby voltage - 100 ± 5 V)?
Is zipper unzipped?
Is fan motor not properly operating?
Is balloon torn?
TROUBLESHOOTING
Solution
Plug in correctly.
Connect disconnected wire cable.
Unplug all other appliances.
Use proper voltage.
Zip balloon completely.
Inspect and repair fan motor if
necessary.
Repair balloon.