Page 1
OPERATION AND PARTS MANUAL GloBug SERIES GB3LED LIGHTING SYSTEM Revision #0 (3/18/14) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Specifications and part numbers are subject to change without notice. Wiring Diagram ............24 Troubleshooting ............. 25 Explanation Of Code In Remarks Column..... 26 Suggested Spare Parts ......... 27 PAGE 2 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST. WE ACCEPT ALL MAJOR CREDIT CARDS! GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 3...
COULD result in DEATH or SERIOUS INJURY. CAUTION Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY. NOTICE Addresses practices not related to personal injury. PAGE 4 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
Page 5
This information will be invaluable in the case of an DO NOT use the equipment for any purpose other than emergency. its intended purposes or applications. GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 5...
Page 6
The possibility exists of severe burns. CAUTION NEVER use force when installing the lamp. Excessive force could cause the lamp to break, causing bodily harm. PAGE 6 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
NOTICE ALWAYS make certain that proper power or extension cord has been selected for the job. See Cable Selection Chart in this manual. GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 7...
16000 ±7% @100W Operation_Enabled 14 to 104°F (-10 to 40 °C) Temperature Range Mast Number of Stages 2 (with gas assist) Maximum Height (Standard) 12.5 feet (3.8 meters) PAGE 8 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
CARRYING CASE CASE released. This feature reduces the amount of vibration or shock to the lamp. Figure 3. GB3LED Transporting GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 11...
COMPONENTS COVER CARRYING CASE Figure 4. Major Components PAGE 12 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
Page 13
6. Weight Support Hook — To add additional weight to the tripod and make the tripod more stable in windy conditions. Place a sandbag or similar weight onto this hook. GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 13...
Placing the latch in the upper position will provide 1 ft. (305 mm) more height. Figure 5. Velcro Strap (Open) LATCH UPPER MAST LOWER Figure 7. Securing the Tripod PAGE 14 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
Page 15
Also remove the AC power cord at this time. BOTTOM PLATE ZIPPER WASHER EYELET S-TYPE HOOK BUTTON Figure 11. Securing Power Cord Figure 9. Removing Balloon/AC Power Cord GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 15...
The possibility exists of electrocution, even death! if the lighting system comes in contact with high voltage power lines. PAGE 16 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
2. Disconnect the AC power cable from the generator. DIMMER SWITCH Figure 14. Dimmer Switch Figure 15. Brightness LED Indicators GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 17...
Page 18
(Figure 19) in a safe location where it will not and pull down cover over balloon/lamp assembly. be damaged. PROTECTIVE COVER ZIPPER Figure 19. Storing Lamp Assembly PROTECTIVE COVER Figure 17. Unzipping the Protective Cover PAGE 18 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
Page 19
VELCRO STRAP TRIPOD LEGS BUCKLE CLICK Figure 21. Velcro Strap (Closed) GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 19...
BALLOON LAMP ENVELOPE GUARD BALLOON ENVELOPE ZIPPER Figure 26. Zipping the Balloon Envelope Figure 24. Removing the Balloon Envelope PAGE 20 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
Page 21
4. Remove the air plate and filter. See Figure 28. AIR PLATE FILTER Figure 28. Filter Removal 5. Install a new filter and reinstall the air plate. GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 21...
Page 22
MAINTENANCE Figure 30. Maintenance Check Points PAGE 22 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
Damaged? Replace T-Handle bolt (Mast) Damaged? Replace v - Daily Check n - Every 20 Hours l -Every 100 Hours s - Every 500 Hours GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 23...
Zip balloon completely. Inspect and repair fan motor if Balloon is not infl ating. Is fan motor not properly operating? necessary. Is balloon torn? Repair balloon. GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 25...
Multiquip. Other entries will for sale through Multiquip. be clarified in the “Remarks” Column. PAGE 26 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
SUGGESTED SPARE PARTS GLOBUG LIGHTING SYSTEM 1 TO 3 UNITS Qty. Description 3....A300260400 ..LED HEATSINK ASSY 2....A100015901 ..BALLOON CLOTH GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 27...