Mazda 2012 MX-5 Owner's Manual page 300

4. Press the voice recognition/hands-free
switch with a short press.
5. The voice guidance reads out the voice
input command number (refer to the
voice input command list for voice
recognition learning). (Ex. "Please read
phrase 1")
6. Say: [Beep] "0123456789" (Say the
voice input command for voice
recognition learning (1 to 8) according
to the voice guidance.)
7. Prompt: "Speaker enrollment is
complete, returning to main menu."
Voice input command list for voice
recognition learning
When reading out, the following points
must be observed:
Read out the numbers one at a time
l
correctly and naturally.
(For example, "1234" must be read out
"one, two, three, four", not "twelve, thirty
four".)
Do not read out parentheses. " (" and
l
hyphens "-" are used for separating
numbers in a phone number.
Ex.
" (888) 555-1212" must be spoken "Eight, eight,
eight, five, five, five, one, two, one, two."
Phrase
1 0123456789
2 (888) 555-1212
3 Call
4 Dial
5 Setup
6 Cancel
7 Continue
8 Help
Command
Bluetooth Hands-Free
NOTE
After user voice registration is completed,
voice guidance "Speaker enrollment is
complete, returning to main menu" is
announced.
qDTMF (dual tone multi-
frequency signal) transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or a
company's automated guidance call center
(When you send tone signals back
according to the voice guidance
recording).
1. Press the voice recognition/hands-free
switch with a short press.
2. Say: [Beep] "XXXX... send" (Say
DTMF code)
3. Prompt: "Sending XXXX... (DTMF
code)"
Interior Comfort
6-77