Mazda 2012 MX-5 Owner's Manual page 180

2012 mx-5
Hide thumbs Also See for 2012 MX-5:
Table of Contents

Advertisement

qActivation/Deactivation
To activate the system, press the ON/OFF
switch.
The cruise main indicator light
illuminates.
To deactivate the system, press the switch
again.
The cruise main indicator light turns off.
WARNING
Keep the ON/OFF switch off when
cruise control is not in use:
Leaving the ON/OFF switch on when
not using the cruise control is
dangerous as you may hit one of the
other buttons and put the vehicle in
cruise control unexpectedly. This
could result in loss of vehicle control.
qTo Set Speed
1. Activate the cruise control system by
pressing the ON/OFF switch.
2. Accelerate to the desired speed, which
must be more than 30 km/h (19 mph).
Starting and Driving
3. Press down the cruise control SET/-
switch and release it at the desired
speed. Release the accelerator
simultaneously.
Cruise
control
switch
Do not continue to hold the switch. Until
you release it, the speed will continue to
decrease (unless you continue to
accelerate) and you will miss the desired
speed.
NOTE
On a steep grade, the vehicle may
l
momentarily slow down while ascending,
or speed up while descending.
Cruise control will turn off if the vehicle
l
speed decreases below 30 km/h (19 mph)
when cruise is activated, such as when
climbing a steep grade.
Driving Your Mazda
5-23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 mx-5

Table of Contents