Kidde KN-COPF-i Specifications

Silhouette 120V AC Wire-in Low Profile
Carbon Monoxide Alarm with
Lithium-Ion Rechargeable Battery Backup

Part Number 21007426

Maintenance Free
Sealed Lithium-Ion Rechargeable Battery Backup
7-year product life (40% longer than other CO alarms)
User-Friendly
Visible written instructions
Three instructional LEDs
Blue Digital LED Display
Reliable Product
UL 2034 Listed
Seven year limited warranty
40% LONGER LIFE THAN
NEW
LONGLIFE: OTHER CO ALARMS
Description
The Kidde Silhouette Carbon Monoxide Alarm is a low
profile AC/DC powered unit that operates on a 120V
power source. The sealed in rechargeable battery
backup lasts the 7-year life of the alarm to provide a
maintenance free design.
This alarm uses advanced electrochemical CO sensing
technology, providing reliable protection against the
dangers of carbon monoxide. The battery backup
feature provides continuous monitoring of CO levels,
even during power outages when AC-only units do not
provide protection. This unit will interconnect with
other Kidde CO and smoke alarms to provide the earli-
est warning of a CO or fire hazard. The Digital Display
feature allows for easy viewing of carbon monoxide
levels from 30-999PPM (parts per million).
This CO alarm is available in a 6-piece cut case with
tray for easy display. The Silhouette CO is a UL Listed
product with a 7-year limited warranty.
SIGNALING
U L
LISTED
Model KN-COPF-i
Install Confidence
Easy Installation
• Innovative low profile alarm fits in most standard 2-gang, metal or
plastic electrical boxes.
• Pre-stripped wiring harness includes easy-off cap and does not
require a stripping tool. Tinned strands increase conductivity and
wire nut grip.
• Rechargeable battery is turned on automatically when AC power
is supplied. (allow unit to charge for 24 hours on initial power up)
Fewer Callbacks
• Test/reset button tests CO alarm circuit operation, and allows
you to immediately silence the alarm.
• Peak level memory button displays the highest CO level measured
since the last reset
• Sealed battery does not need to be replaced for the life of the alarm.
User-Friendly Features
• Green LED indicates power is being delivered to the alarm. Red LED
light indicates unit is in alarm. Amber LED light indicates unit is the
initiating alarm.
• Battery backup provides protection in case of power failure.
• Interconnectable with up to 24 devices (of which 18 can be initiating)
including smoke, CO and heat alarms. See user's guide for complete
instructions.
• Digital Display – Displays the level of carbon monoxide the unit is
sensing. The unit updates this reading every 15 seconds.
• Peak Level button displays the peak CO level recorded by the alarm
since it was last reset or unplugged
• Lithium-Ion Rechargeable Battery Back-up provides protection during
power outages.
• 7-Year End of Life Warning – Alerts user to replace CO alarm after
7-years of operation (40% longer than other CO alarms).