Troubleshooting - HP 800 Installation Manual

Troubleshooting

If you run into problems getting your OmniBook started after installing new
hardware, you can use the troubleshooting suggestions in this chapter for getting
back on track. If you have questions that this manual doesn't answer, try these other
sources.
If the OmniBook is not running
Check with your computer system administrator, if you have one.
Contact your dealer, or contact Hewlett-Packard—see the OmniBook Support
and Service booklet or OmniBook Support in the online OmniBook Library.
Find technical information about the OmniBook on the Internet. Visit the
World Wide Web site at http://www.hp.com/go/omnibook.
If the OmniBook is running
See the online OmniBook User's Guide—it's your main source of information
about using the OmniBook. It includes extensive troubleshooting information.
If you're having a problem within one particular application, check the manual
for that application, too.
Check the documentation for your operating system. (For Windows 95, check
the printed Introducing Microsoft Windows 95 manual. For Windows for
Workgroups, check the online MS-DOS and Windows manuals.)
Look at the online Help for Windows and other applications.
See other books about Windows, MS-DOS, and other applications. Check your
local library or bookstore.
Find technical information about the OmniBook on the Internet. Visit the
World Wide Web site at http://www.hp.com/go/omnibook.
1-24