Table of Contents
Advertisement
Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The
options are Disabled and Enabled.
Hit 'Del' Message Display
This feature displays "Press DEL to run Setup" during POST. The options are
Enabled and Disabled.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off
and Last State.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Resume On RTC Alarm
Use this feature to set an event using the Real Time Clock (RTC) to wake the system
at specifi ed times. The options are Enabled and Disabled.
RTC Alarm Date (Days)
This option appears if Resume On RTC Alarm is Enabled. The options are Every
Day and 1 ~ 31 (corresponding to the days of the month.)
RTD Alarm Time
Set the time the system wakes up during the day specifi ed under RTC Alarm
Date above.
7-5
Chapter 7: BIOS
Advertisement
Table of Contents
