Table of Contents
Advertisement
Universal Serial Bus (USB)
There are two Universal Serial Bus
ports located on the I/O panel and
fi ve additional USB headers located
on the serverboard. The headers,
labeled USB2/3 and USB4/5, can be
used to provide front side USB access
(cables not included). USB 6 is an A
Type. See the tables on the right for
pin defi nitions.
Serial Ports
Two serial ports are included on the
serverboard: COM1 is a port located
beside the USB ports and COM2 is
a header located on the corner of the
board near the SIMLC slot. See the
table on the right for pin defi nitions.
Wake-On-LAN
The Wake-On-LAN header is des-
ignated JWOL on the serverboard.
See the table on the right for pin
defi nitions. You must enable the LAN
Wake-Up setting in BIOS to use this
function. (You must also have a LAN
card with a Wake-On-LAN connector
and cable to use this feature.)
Chapter 5: Advanced Serverboard Setup
USB Ports Pin
Defi nitions
(USB0/1/6)
Pin#
1
2
3
4
5
USB Headers
Pin Defi nitions (USB2/3, USB4/5)
USB2/4
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
Key
Serial Port Pin Defi nitions
Pin #
Defi nition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Wake-On-LAN
Pin Defi nitions
Pin#
1
2
3
5-17
Defi nitions
+5V
PO-
PO+
Ground
N/A
USB3/5
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
No connection
Pin #
Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Defi nition
+5V Standby
Ground
Wake-up
Advertisement
Table of Contents
