Removing and installing components during servicing
Installing a memory module
1
Attaching the cover
► Place the cover in the correct mounting position (1).
► Tighten the screw (2).
► Complete the installation, see
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
64
2
a
"Finishing component removal", Page
"Installing a battery", Page
► Insert the memory module with the contacts
and the recess (a) facing the slot (1).
Memory module
Memory expansion
► Carefully push the memory module
downwards until you feel it click
into place (2).
2
1
34).
64.
Fujitsu