CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when an optical disk is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the optical disk when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier has been inserted, but
instead continues to flash, this means that the drive cannot access the data carrier.
Either the data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Inserting or removing an optical disk
Removing
Inserting
The notebook must be switched on.
2
Fujitsu
1
Working with the notebook
► Push the insert/eject button (1).
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the optical disk in the drive tray with
the printed side facing upwards.
or
► Remove an optical disk that has
been inserted.
► Push in the drive tray until you
feel it lock into place.
37