2-3.2 Sdram Memory Module Installation - SOYO SY-7VCM User Manual

Celeron and pentium iii processor supported via 694x agp/pci motherboard 66/100/133 mhz front side bus supported micro-atx form factor

Hide thumbs Also See for SY-7VCM:

Table of Contents

Hardware Installation

2-3.2 SDRAM Memory Module Installation

Your board comes with two DIMM sockets, providing support for up to

1GB of main memory using unbuffered and registered DIMM modules

from 8MB to 512MB. On this motherboard, DRAM speed can be set

independent from the CPU front side bus speed. Depending on the DRAM

clock speed setting in the BIOS setup (Chapter 3), appropriate memory

modules must be used. For 66MHz DRAM speed, use PC66 memory; for

100MHz DRAM speed, use PC100 memory; for 133MHz DRAM speed,

use PC133 memory.

SDRAM

SY-7VCM

Table of Contents