2Ch / 3Ch / 4Ch - Jensen A400HLX Installation And Operation Manual

A400HLX, A600HLX

2CH / 3CH / 4CH

The A400HLX/A600HLX can be configured for
three different input modes: 4 channel, 3 channel
or 2 channel.
When the input selector is set
4 Channel
to 4CH, the amplifier will
2CH
3CH
operate as a standard 4
4CH
channel amp with all RCA
inputs connected.
INPUT OUTPUT
REAR LR
HI-LEVEL
RR
3 Channel When the input selector is set
to 3CH, the amplifier is
2CH
3CH configured for stereo/mono
4CH
operation. The front channels of
the amplifier operate in stereo
mode. The rear channels of the
amplifier are internally bridged
for mono operation. In 3CH the
following RCA inputs will be
used:
INPUT OUTPUT
REAR LR
HI-LEVEL
RR
REC002_A4n600HLX_E
INPUT OUTPUT
LR LF LF FRONT
HI-LEVEL
RR RF RF
INPUT OUTPUT
LR LF LF FRONT
HI-LEVEL
RR RF RF
11
2 Channel (A400HLX)
2CH
When the input selector is set
3CH
to 2CH, the amplifier is
4CH
configured for bridged stereo
operation. The amplifier will
need a two channel input even
though there are four inputs. In
2CH the following RCA inputs
will be used:
INPUT OUTPUT INPUT
REAR
LR LR LF
HI-LEVEL
RR RR RF
Note
Although the above illustrations indicate the
low level input being used, the same
connections would apply to the high level
input.
INPUT OUTPUT INPUT
REAR
LR LR LF
HI-LEVEL
RR RR RF
High Input
1/9/02, 4:13 PM
®
OUTPUT
FRONT
LF
HI-LEVEL
RF
OUTPUT
FRONT
LF
HI-LEVEL
RF
11