BEFORE OPERATING YOUR APPLIANCE
FOR THE FIRST TIME
TIPS & INFORMATION
SETTING THE TIME
If you have purchased a model fitted with an electronic or
programmable timer, you mUST set the time of day before
you can operate your appliance.
ELECTRONIC CLOCK
•
After the appliance has been electrically connected
"12.00" will be displayed and the "clock" indicator
will flash.
•
To set the time of day, press – or +. 5 seconds after
the last change, the "clock" indicator will disappear,
confirming the time has been set.
•
Note: The clock has a 24-hour display.
PROGRAMMABLE CONTROLLER
•
After the appliance has been electrically connected,
the set clock symbol
will flash on the clock display.
•
To set the time of day, press – or +. 5 seconds after
the last change the timer arrow
confirming the time has been set. once the time has
been entered, the clock advances minute by minute.
•
NOTE: The clock has a 24-hour display.
SETTING THE TIME FOR POR881
When power is supplied to your oven "12.00" will be
displayed on the clock and the display will flash.
•
To set the time of day hours, press – or +, then press
CLoCK and the seconds will begin to flash which can
be set by pressing the – or + buttons. 5 seconds after
the last change, the clock display will stop flashing,
confirming that the time has been set.
Note: The clock has a 24-hour display.
PREPARING YOUR APPLIANCE FOR THE FIRST TIME
•
Please remove all internal boxes and bags from the
oven before operation.
•
Please wipe out the oven interior prior to operation
with warm soapy water and polish dry with a soft
clean cloth. Do not close the oven door until the
oven is completely dry.
•
New appliances can have an odour during first
operation. It is recommended to 'run in' your oven
before you cook for the first time. Run the oven at
180ºC for 2-4 hours and ensure that the room is
well ventilated.
•
DO NOT line the oven with foil, it will damage
will disappear,
the enamel.
•
If your appliance is fitted with a mechanical "Auto
Off" timer, make sure it is set to the 'Off' marker for
manual operation. See image.
80
60
90 minute "Auto Off" Timer
80
60
OPERATION
7