LG 22LG3DDH Setup Manual page 17

Installer Menu Items 046 through 117
Menu
Function
Item
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
077 QUICK SHUTOFF
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN. **
088 EN NOISE MUTE
090 KEY LOCK
091
YPrPb2 EN ***
094 SAP MENU EN
096 DEF. ASP. RATIO
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
*
1, 3, 255 for 22LG3DDH.
206-4190
Value Range Default Value
1 ~ 4, 6, 255 * 6
0 / 1 0
0 / 1 0
0 / 1 1
0 ~ 7 2
0 ~ 7 2
0 / 1 0
0 / 1 0
0 ~ 17 0
0 ~ 255 255
0 ~ 255 255
0 ~ 255 255
0 ~ 255 255
0 / 1 1
0 ~ 5 5
0 / 1 0
0/1/17 1
0 / 1 1
0 / 1 0
0 / 1 1
0 / 1 1
0 ~ 4 2
1 ~ 100,
100
101 ~ 200
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0
0 / 1 0
0 / 1 0
**
Not applicable for 22LG3DDH.
Caution: Installer Menu settings may affect options available
from the TV setup menus or the Function Menu.
Brief Description of Function and Comments
Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0).
Set to 1 for MPI Aux source to be reported as a channel number instead of
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Channel-Time display.
Chooses custom foreground color for the Channel-Time display.
Chooses custom background color for the Channel-Time display.
If set to 1 and item 028 CH. OVERIDE is set to 0, "NOT AVAILABLE" message
is displayed if user direct tunes a channel that is not in the favorite channel list.
If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel.
Allows TV timed power OFF press and hold setup with pillow speaker channel
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
If set to 1, enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-controlled
Removes block hours setting for Parental Control and makes block permanent.
Set to 0 to disable RGB input. Set to 1 to enable RGB input.
Set to 17 for Auto Configure.
If set to 1, audio is muted if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 1 to enable HDMI 2 input.
Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Sets the level of the TV picture back lighting. Settings above 101 control
dynamic back lighting and disable power savings mode.
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
Set to 0 for Normal. Set to 1 for Blank.
Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings.
*** Applicable for 42LD6DDH only.
Installer Menu (Cont.)
Channel 0.
button.
systems.
Function Menu.
Selects ATSC band.
power cycle.
17