Cisco SPA1112 Provisioning Manual page 89

Voice Parameters
<SIP_TCP_Port_Min>
<SIP_TCP_Port_Max>
<CTI_Enable>
<SIP_T1>
<SIP_T2>
<SIP_T4>
<SIP_Timer_B>
<SIP_Timer_F>
<SIP_Timer_H>
<SIP_Timer_D>
<SIP_Timer_J>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
The lowest TCP port number that can be used for SIP
sessions.
Default setting: 5060
The highest TCP port number that can be used for SIP
sessions.
Default setting: 5080
Enables or disables the Computer Telephone Interface feature
provided by some servers.
Default setting: no
RFC 3261 T1 value (round-trip time estimate), which can
range from 0 to 64 seconds.
Default setting: 0.5
RFC 3261 T2 value (maximum retransmit interval for non-
INVITE requests and INVITE responses), which can range from
0 to 64 seconds.
Default setting: 4
RFC 3261 T4 value (maximum duration a message remains in
the network), which can range from 0 to 64 seconds.
Default setting: 5
INVITE time-out value, which can range from 0 to 64 seconds.
Default setting: 32
Non-INVITE time-out value, which can range from 0 to 64
seconds.
Default setting: 32
H INVITE final response, time-out value, which can range from
0 to 64 seconds.
Default setting: 32
ACK hang-around time, which can range from 0 to 64
seconds.
Default setting: 32
Non-INVITE response hang-around time, which can range
from 0 to 64 seconds.
Default setting: 32
6
89