Time_Setup> Parameters - Cisco SPA1112 Provisioning Manual

Router Configuration Parameters
<Time_Setup> Parameters
<Time_Setup> Parameters
NOTE
Parameter
<Time_Zone>
<Auto_Adjust_Clock>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
This section describes the parameters in the <SNMP> section of the config.xml
file.
In addition to the descriptions, also refer to
Time Zone with Daylight Savings and Auto-Recovery Enabled, page
Details
Description: The time zone for the site where the ATA is in operation
User Interface: Network Setup > Basic Setup > Time Settings
page, Time Zone field
Values: number identifying the time zone
See Appendix B, "Time Zone
Default: -08 1 1
Example: Germany
<Time_Zone>+01 2 2</Time_Zone>
Description: Enables or disables automatic time adjustments for
daylight savings time
User Interface: Network Setup > Basic Setup > Time Settings
page, Adjust Clock for Daylight Saving Changes field
Values:
0: Disabled
1: Enabled
Default: 1
Example: Automatic Daylight Saving adjustment enabled
<Auto_Adjust_Clock>1</Auto_Adjust_Clock>
<Time_Setup> Example: Germany
Settings.".
7
178.
176