Router Configuration Parameters
<WAN_Interface> WAN Interface Parameters
<WAN_Interface> WAN Interface Parameters
NOTE
Parameter
<WAN_Connection_Type>
Provisioning Guide for Cisco SPA100 and SPA200 Series Analog Telephone Adapters
This section describes the parameters in the <WAN_Interface> section of the
config.xml file.
TIP: You can click the <WAN_Interface> heading in the XML file to expand or
collapse the nested parameters in this section.
In addition to the descriptions, also refer to
MTU mode, page
153,
page
154, and
WAN Example 3: PPPoE with Connect on Demand, page
Details
Description: Defines the connection/addressing mode used for the
INTERNET (WAN) port.
User Interface: Network Setup > Basic Setup > Internet Settings
page, Connection Type field
Values:
•
dh: DHCP
•
st: Static
•
pp: PPPoE
Default: dh
Example: Static connection type
<WAN_Connection_Type>st</WAN_Connection_Type>
WAN Example 1: DHCP with automatic
WAN Example 2: Static IP with manual MTU mode,
7
154.
149