Surface Burner Module; Grill Module - Maytag CSG9900A User Manual

Gas cooktop
Table of Contents

Advertisement

Surface
Burner
Module
To Install
Burner
Module
]
1. Be sure all control knobs are turned off.
Grill Module
2. If the grill burner grates are in place, remove them
The grill consists of two black grill grates and a grill
before installing a surface burner
module. Clean
burner. Only install the grill on the left side of your
burner
basin of any grease
accumulation
(See
eooktop.
Cook-top Cleaning Chart, pp. 10-11).
3. Position the burner assembly with the mixer tube
openings
toward
the orifiees.
Slide the burner
_
_I
_!_
l
assembly toward the orifices until the opening for
the ignitor is over the ignitor. Lower into place until
the side openings are resting on the burner supports
and the ignitor is centered
between the two flash
tubes.
4. Install the aeration tray by inserting the prong at the
end of the tray into tile opening in the end of the
burner
basin. Lower the opposite
end into the
eooktop.
To Install
Grill
Module
NOTE: Before first use, read "Surface Cooking" and
1. Before installing grill components, be certain control
"Cleaning Chart--Surface
Burner Assembly"
knobs are in the OFF position.
pages 7 and 11.
'2. Position the grill burner with mixer tube openings
To Remove
Burner
Module
toward the orifices. Slide the burner towards the
1. The control knobs should be in the OFF position
orifices until the ignitor is in between front and rear
and the eooktop should be cool
grill sections. Lower into place until side openings
2. Remove the aeration tray by lifting up the front end
are resting on fi_e burner support pins.
on the right side (back end on tile left side) until the
3. Place the grill grates on the top of the cooktop.
top clears the opening of the eooktop by about 5
inches.
3. Hold aeration tray by the sides and slide away to
remove the prong from the opening and clear the
surface burners.
4. Lift up on the sides of the surface burner assembly
bracket about 2 inches. Slide away from the orifices.
To Remove
Grill
Module
1. Remove grill components
once they are cool. Be
sure control knobs are in the OFF position.
2. Remove grill grates.
3. Remove grill burner.
=AGE 6

Advertisement

Table of Contents
loading

Table of Contents