Pump & Brush Belt Replacement - Bissell PowerWash Deluxe User Manual

M
aintenance and care
Pump & brush belt replacement
1. Turn the power switch OFF and unplug from
wall outlet.
2. Step on handle release pedal and recline
handle on floor.
3. Remove the Tank-in-Tank and set aside.
4. Remove the belt access door located near
the ReadyTools Dial. Insert a flathead
screwdriver into the slot nearest the handle
to gently pry off the belt access door.
5. Turn the machine onto its side so the belt
access area is facing upward.
6. On the bottom of the machine, near the
belt access area, is a red retainer plate
that holds the black brush arm and brush
in place. Using a Phillips head screwdriver
remove the screw that holds the red retainer
plate in place. Set red retainer plate and
Phillips head screw aside.
7. Remove the black brush arm that holds the
brush in place. Set the black brush arm
aside.
8. Remove the "toothed" brush belt from the
brush then from the red pump pulley. Set the
"toothed" brush belt and brush aside.
9. Locate and remove the broken pump belt.
to reduce the risk of fire,
electric shock, or injury,
unplug machine from
outlet before servicing.
14
w w w . b i s s e l l . c o m
W aRnInG:
2
3
5
7
9
4
Red Retainer Plate
6
8