Brush Removal And Large Belt Replacement - Bissell 9500 User Manual

M
aintenance and care

Brush removal and large belt replacement

Brushes can be removed for cleaning or
replacement as needed.
1. Follow small belt removal instructions on
page 21.
2. Remove brush rolls by pulling them off of
the metal rods.
3. Place cleaned or new brush rolls back onto the
rods. Make sure one washer is on each end of
the rollers prior to sliding onto the rod. Be sure
to let the rod slide through the bushing to
insure proper fit.
4. Re-attach the long belt on the bottom to the
cogs of the small roller brushes.
5. Place small belt over back roller and metal cog.
6. Place pivot arm in place and screw in place
using the silver screw.
7. Re-attach clear end cap by tightening with
the (2) black screws.
8. Return front nozzle to front of unit by
latching from underneath and then securing
with a screw.
If you have any questions or are having
trouble installing or replacing your belt(s) or
brushes, please call BISSELL Consumer
Services.
22
w w w . b i s s e l l . c o m
ug120-4042_9500E.indd 22 ug120-4042_9500E.indd 22
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2. 3.
4. 5.
6. 7.
8.
5/7/08 3:37:49 PM 5/7/08 3:37:49 PM