Page 2
1. Set the controls • Turn volume off. Set the bass, middle and treble controls to center. 2. Plug in • Connect INK 3 to an amplifier or PA with a ¼-inch instrument cable. The battery light will flash once quickly to indicate it has switched on.
Page 4
INK 3 Controls Volume • For the cleanest signal, set the volume knob as high as possible, without causing distortion or feedback. Bass • Boost here to add depth and weight to the sound of the guitar. Middle • Turn the middle knob all the way left for a smooth “scooped out”...
Page 5
Tuner • Press and hold the tuner display to activate the onboard tuner; press once to turn it off. This digital chromatic tuner accommodates all standard and alternate tunings and mutes the output when engaged. It is calibrated to A = 440Hz and can be activated without an instrument cable connected.
Page 6
Sample EQ Settings Fingerstyle “Scooped” Mid This will add fullness to the bass This setting emphasizes extreme bass and definition to the treble. and treble...
Page 7
Strummer Cut Through the Mix A good setting for strumming chords. When you need to be heard through a loud band.