Subaudible Tones - Icom IC-2820H Instruction Manual

■ Subaudible tones

D Subaudible tones
qSelect the main band, mode/channel you wish to set the
subaudible tones to, such as VFO mode or memory/call
channel.
w Push [F•
] to display the function guide.
ePush [MENU](V/MHz•SCAN)
screen.
rRotate [DIAL] to select "DUP/TONE..." then push
[MAIN•BAND].
tRotate [DIAL] to select "REPEATER TONE" then push
[MAIN•BAND].
yRotate [DIAL] to select and set the desired subaudible fre-
quency, then push [MAIN•BAND].
[F• ]
[DIAL]
[MAIN•BAND]
uPush [BACK](V/MHz•SCAN)
DUP/TONE set mode.
NOTE: The subaudible tone encoder frequency can be set
in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.
(Encoder function)
to enter MENU
(Right band's)
[MENU]
twice to exit
(Right band's)
REPEATER OPERATION
z Set the main band, mode/channel you wish to
SET
set the subaudible tones for, such as VFO mode
B
or memory/call channel.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
x Push [
B(D-OFF)] to enter MENU screen.
SET
c Push [Y] or [Z] to select "DUP/TONE..." then
push [ B(D-OFF)].
SET
v Push [Y] or [Z] to select "REPEATER TONE"
then push [
SET
b Push [Y] or [Z] to select the desired subaudible
tone frequency then push [
Push
n Push [
A(MW)] to return VFO mode.
CLR
• Subaudible tone frequency list
67.0 79.7 94.8 110.9 131.8
69.3 82.5 97.4 114.8 136.5
71.9 85.4 100.0 118.8 141.3
74.4 88.5 103.5 123.0 146.2
77.0 91.5 107.2 127.3 151.4
B(D-OFF)].
B(D-OFF)].
SET
(unit: Hz)
156.7 171.3 186.2 203.5 229.1
159.8 173.8 189.9 206.5 233.6
162.2 177.3 192.8 210.7 241.8
165.5 179.9 196.6 218.1 250.3
167.9 183.5 199.5 225.7 254.1
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
32