Guide Bar And Saw Chain Combinations; Symbols On The Battery And/Or On The Battery Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Husqvarna 436 Li Operator's Manual

Guide bar and saw chain combinations

The following cutting attachments are approved for the models Husqvarna 436 Li and 536 LiXP.
Length, inch Pitch, inch
10 3/8
12 3/8
14 3/8
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:+46-36-146500, declares under sole responsibility that the cordless
battery chainsaws Husqvarna 436 Li and 536 LiXP from 2012's serial numbers and onwards (the year is clearly stated
in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of December 12, 2006 "relating to electrical equipment designed for use within certain voltage limits" 2006/95/EC.
- of September 6, 2006 "on batteries and accumulators and waste batteries and accumulators" 2006/66/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN 60745-1, EN 60745-2-13, EN 60335-2-29, EN 62133, EN 55014, EN 55014-2.
Notified body: 0366, VDE-Prüf- und Zertifizierungsinstitut GmbH, Merianstraße 28, DE-63069 Offenbach (Am Main),
Germany, has carried out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12,
clause 3b.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/162/001
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 19 September 2012
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
TECHNICAL DATA
Guide bar
Gauge, mm
1,1
1,1
1,1
Max. nose
Type
radius
7T
9T Husqvarna H38
9T
Saw chain
Length, drive
links (no.)
40
45
52
English – 41