Electronic Ignition System Operations - Weber Genesis 54487 Owner's Manual

ELECTRONIC IGNITION SYSTEM OPERATIONS

If the Electronic Ignition System fails to ignite, be sure there is gas flow by attempting to
match light your burners. Refer to "MAIN BURNER MANUAL IGNITION" . If match lighting
is successful, the problem lies is the electronic ignition.
WARNING: All gas controls and supply valves should be in
the OFF position.
(1). Some batteries have a plastic protective wrap around them. This plastic must be
removed. Do not confuse this plastic with the battery label.
"IGNITER MODULE WIRE GUIDE" below.
channel (2). If properly positioned, you will hear a snap (3).
at burner.
If the Electronic Ignition System still fails to light, contact the Customer Service
Representative in your area using the contact information on our web site. Log
®
onto www.weber.com .
22
MAINTENANCE
A
1
4
Wire End & Terminal Color
Black (1)
Yellow (2)
Blue (3)
Green (4)
1
2
3
IGNITER MODULE WIRE GUIDE 330
D C B
3
2
1 2
4 3
Burner Tube
Left Burner (A)
Right Burner (B)
Center Burner (C)
Sear Burner (D)