Asus A8AE-LE Amberine User Manual page 18

10. System panel connector (10-pin F_PANEL1)
This connector accommodates several system front panel functions.
A8AE-LE
A8AE-LE System panel connector
• System Power LED Lead (2-pin PWR LED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• Hard Disk Activity LED Lead (2-pin HD LED)
This 2-pin connector is for the HDD LED cable. The read or write activities of the
device connected to the any of IDE connectors cause the IDE LED to light up.
• ATX Power Switch / Soft-Off Switch Lead (2-pin PWR BTN)
This connector connects a switch that controls the system power. Pressing the
power switch turns the system between ON and SLEEP, or ON and SOFT OFF,
depending on the BIOS or OS settings. Pressing the power switch while in the
ON mode for more than 4 seconds turns the system OFF.
• Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the system power.
14 ASUS A8AE-LE (Amberine/AmberineM) Motherboard
PWR LED PWR BTN
F_PANEL1
HD LED RESET