Lenovo ThinkServer 1045 Installation And User Manual page 62
Hide thumbs
Also See for ThinkServer 1045:
- Hardware maintenance manual (166 pages) ,
- Benutzerhandbuch (156 pages) ,
- Manual d'utilisation (152 pages)
Table of Contents
Advertisement
6. Connect the mini SAS signal cables to the RAID controller.
Note: Use the 400 mm (15.75 inches) mini SAS signal cable.
Figure 45. Connecting the mini SAS signal cables to the RAID controller
1
Ports 0-3
2
Ports 4-7
a. For one mini SAS signal cable, connect the end to the ports 0-3 on the RAID controller.
b. For the other mini SAS signal cable, connect the end to the ports 4-7 on the RAID controller.
7. Install the RAID controller into an appropriate PCI card slot on the riser card assembly. Then, install
the screw to secure the RAID controller in place.
Figure 46. Installing the RAID controller into the PCI card slot on the riser card
8. Install the riser card with the RAID controller into an appropriate PCI card slot on the system board.
52
ThinkServer Installation and User Guide
Advertisement
Table of Contents
