Windows Xp; Setting The Media; Ejecting The Media; Playing Back Audio Cds - IBM USB 2.0 CD-RW/DVD-ROM Combo II Drive User Manual

Note: The message indicated above may differ depending on the versions of your
operating system. Refer to the instruction manual for your computer or operating
system for details.

Windows XP

1. Exit the program that uses the drive.
2. Confirm that the Write indicator of the drive is off.
3. Click the Unplug or Eject Hardware icon on the tray.
4. Select removing drive. In this case, select the drive name assigned to the drive
5. The Safe to Remove Hardware confirmation window appears. Click the OK
6. Remove the plug of the USB cable from the USB terminal of the computer.
Note: The message indicated above may differ depending on the versions of your
operating system. Refer to the instruction manual for your computer or operating
system for details.

Setting the media

1. Press the eject button of the drive to open the tray.
2. Place the media on the tray with the label face upward. Align the center hole of
3. Close the tray gently until it is completely locked.
4. When the tray is correctly closed, the media is recognized and made usable

Ejecting the media

1. Press the eject button of the drive to automatically open the tray.
2. Lift the edge of the disc carefully from the tray while pressing the upper
3. Close the tray gently.

Playing back Audio CDs

Use Windows Media Player or your own audio CD playback software for playing
back audio CDs using the drive.
5-2
USB 2.0 CD-RW/DVD-ROM Combo II Drive: User 's Guide
(D: in this figure).
button.
the disc with the clamp at the center of the tray and fit the disc in securely by
pressing the outer vicinity of the center hole.
after the busy indicator blinks for some seconds.
section of the clamp.