Auxiliary Input - Jensen Heavy Duty JHD40BT Installation And Operation Manual

NOTE: BT Pair and BT Device menu options are only available while the BT feature is
ON and the radio is in BT Audio mode.
NOTE: A locked Bluetooth device will not be overwritten from the list.
Battery Alarm Operation
If Battery Alarm is set to "On", an alarm will sound (8 beeps every 30 sec) when the voltage
drops to 10.5V (+/- 0.3V). The LCD will display the "low battery" and the current mode
alternatively.
NOTE: "Off" is the default setting for Battery Alarm. If the audio is muted or the volume
is set to 0, the audible beep will not be heard.
Equalizer
Press the EQ/LOUD button (11) to turn on the equalization function and select between five
pre-defined bass and treble curves: User > Flat > Pop > Classical > Rock.
Loudness
Press and hold the EQ/LOUD button (11) to toggle true loudness on/off. When listening to
music at low volumes, this feature will boost the bass ranges to compensate for the
characteristics of human hearing.

Auxiliary Input

To access an auxiliary device:
1. Connect the portable audio player to the AUX IN cables routed from the rear of the radio.
2. Press the MODE button (4) to select Aux In mode.
3. Press MODE again to cancel Aux In mode and switch to the next mode.
Liquid Crystal Display (LCD)
The current frequency and activated functions are shown on the LCD panel (20).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the numbers on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a normal range.
Quick Exit Hot Key
In the following modes and conditions, press the AS/PS
exit the current operation without waiting for the system default time out:
• System menu operation
• Searching mode
• Audio menu operation
button (15) < 3 seconds to quickly
6
JHD40BT