Setting Up A Conference - Siemens HiPath 4000 Operating Manual

Step by Step
v
Start conference?
Conference?
Conf. 1-2-3
Add to conference?
Consultation?
v
Conference?
v
Conference?

Setting up a Conference

You can set up a conference from the following types of
connection:
• individual call
• consultation call
• second call
Initiating a conference from an individual call
You want to set up a conference.
You receive a call.
or
~
You call a station.
OK
Select and confirm.
~
Call the second party.
Announce the conference.
OK
Confirm.
You receive the following message briefly: "1 is your po-
sition"
This display appears.
Setting up a conference from a consultation call
You are connected to one party and call a second party.
OK
Confirm.
~
Call the second party. When the second party answers,
you announce that a conference is underway.
OK
Select and confirm.
You receive the following message briefly: "1 is your po-
sition"
Setting up a conference from a second call
You are conducting a call.
Ö
A second call is shown on the display and signaled with
a camp-on tone.
You accept the second call (
The other party is placed on hold.
OK
Select and confirm.
You receive the following message briefly: "1 is your po-
sition". All parties are united in a conference.
Making Calls – Enhanced Functions
Page 57 or Page 58).
63