McCulloch M48A User Manual page 15

ABOVE DECK OIL CHANGE
ABOVE DECK OIL CHANGE
1. Place 12mm (inside diameter) tube onto outlet of
1. Place 12mm (inside diameter) tube onto outlet of
above deck oil change tap. Fig. 11A above deck oil change tap. Fig. 11A
2. Push and turn tap to allow oil to flow. Fig 11B
2.
3. Ensure oil is drained into a suitable container for
3. Ensure oil is drained into a suitable container for
proper disposal. proper disposal.
Note To ensure full drainage of oil sump it may
Note To ensure full drainage of oil sump it may
be necessary to prop up the wheels on the
be necessary to prop up the wheels on the
opposite side of mower so that the engine is opposite side of mower so that the engine is
tilted towards the outlet.
tilted towards the outlet.
UNDER DECK WASH CONNECTOR
UNDER DECK WASH CONNECTOR
1.
2. Start mower and set engine speed control to FAST.
1. Attach click on hose fitting to the connector.
3. Turn hose on.
(Fig.11C)
4. Allow approximately ONE MINUTE to clean the
2. Start mower and set engine speed control to FAST.
underside of the deck.
3. Turn hose on.
5. Turn off hose and stop engine.
4. Allow approximately ONE MINUTE to clean the
6. Disconnect hose from mower.
underside of the deck.
7. Allow mower to dry before storage.
5. Turn off hose and stop engine.
6. Disconnect hose from mower.
7. Allow mower to dry before storage.
MAINTENANCE
MAINTENANCE
Fig. 11A
Fig. 11B
Fig. 11C
12
18
AU
AU