McCulloch M48A User Manual page 12

FITTING THE MULCHING PLUG TO THE MOWER (OPTIONAL)
FITTING THE MULCHING PLUG TO THE MOWER (OPTIONAL)
1. Stop the engine.
1. Stop the engine.
2. Make sure the discharge chute and the underside of the mower are clean. If not, clean the mower.
3. Raise the flap with left hand, and using the hand-hold on the mulching plug, insert the mulching plug, with
2. Make sure the discharge chute and the underside of the mower are clean. If not, clean the
the angled section to the mowers right, into the discharge chute. Make sure the back of the plug is sitting
mower.
on the rear axle, then lower the flap.
3. Raise the flap with left hand, and using the hand-hold on the mulching plug, insert the
mulching plug, with the angled section to the mowers right, into the discharge chute. Make
sure the back of the plug is sitting on the rear axle, then lower the flap.
Fig. 8A
Fig. 8B
12
9
AU
AU