Dvi Mode - Toshiba TekBright User Manual

User's Manual

DVI Mode

Problems
No Picture
Abnormal
Sound
18
Current Status
LED ON • Using OSD, adjust brightness and contrast
LED OFF • Check the power switch.
• Verify that the AC power cord is properly
LED displays • Verify that the video signal cable is properly
amber color
• Verify that the power to the host PC is ON
No sound, or • Verify that the audio cable is connected to
sound level is too
low
• Check to see if the volume setup of the
Remedy
to maximum or reset to their default
settings.
connected to the monitor.
connected to the monitor.
both the monitor and the host PC.
host PC is in the minimum position and try
to raise the volume level.