Getting your
documents ready
2-2
3. Be sure the output tray panel is down.
4. Adjust the output tray by pulling out the extender if needed.
1. Standard paper size documents feed easily through the Scan
Station. When organizing your documents for scanning, stack the
documents so the lead edges are aligned and centered in the input
tray. This allows the feeder to introduce documents into the Scan
Station one at a time.
2. Remove all staples and paper clips before scanning. Staples and
paper clips on documents may damage the Scan Station and
documents.
3. All inks and correction fluids on the paper must be dry before
scanning is started.
A-61698 November 2010