Samsung SNP-3302 User Manual page 88

setup screen
5. Specify an operation that will perform if an alarm occurs.
• Alarm output1 / Alarm output2 : Select whether to set the alarm output if an alarm
is incoming, and specify the alarm output time.
• E-mail sending : Specify the use of email transfer in the alarm input setup.
• Record : Specify the use of recording in the alarm input setup.
• Goto Preset : Moves to the specified preset location when setting the alarm input.
6. When done, click [Apply (
VA / MD
1. From the Setup menu, select the
<Event (
2. Click <VA / MD>.
To set the Motion Detection
1. Select a motion detection mode.
2. Specify the use of motion detection.
3. Select a sensitivity level of the motion
detection.
The greater the level is, the lesser
movement will be detected.
4. Place the cursor at a point in the video
and drag it to whatever you need.
5. Specify whether or not the event area is
displayed.
- If you select <On>, a portion of the
selected area considered that an
event occurred will be boxed in white.
6. Specify the object size.
7. Specify the activation time and activation condition.

For more information about <Activation time> and <Action>, refer to "Alarm input". (page 87)
8. When done, click [Apply (

J
If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion
sensor may not work.
88_ setup screen
)> tab.
)].
)].