Samsung SNP-3302 User Manual page 71

To set the auto run
This will perform the sequence operation that you have specified if no controller
manipulation is made for a certain time.
1. Set <Mode> in <Sequence setup> to
<Trace & Auto Run>.
The menu screen will switch to the
PTZ tracking and Auto execution menu
screen.
2. Select an auto run mode.
• Home : Automatically executes the
operation to the home position.
• Preset : Automatically executes the
operation to the preset number.
• Swing : Automatically executes the operation in Swing mode.
• Group : Automatically executes the operation in Group mode.
• Tour : Automatically executes the operation in Tour mode.
• Trace : Automatically executes the operation in Trace mode.
• Auto pan : Automatically executes the 360° rotation in the pan direction.
PT limit
You can specify restrictions on the pan or tilt function.
1. From the Setup menu, select the
<Audio & Video (
2. Click <PT limit>.
3. Decide if you want to limit the PT
operations. If so, specify the details.
• Pan / Tilt Limit : Select a mode to set
between Pan limit and Tilt limit.
- Use : Select whether to use limit in
set mode.
- [ ] : Start limit setting.
- [ ] : Provide the start and end points.
- [ ] : If you want to change the point setting, click this to return to the
input dialog.
)> tab.
English _71